This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 827338
- Atmospheric plasma chemical vapour deposition coated films, meeting silicone-free release liner requirements.
- Stable; easy, medium or tight release.
- Release force controllable.
- Outgassing & Si rinsing; test results show non-detectible levels of silicone
- Very high subsequent adhesion; total absence of coating transfer.
- Compatible with different acrylic and silicone adhesives.
- Undetectable release coating, no change in transparency, coating thickness less than 30nm
- PET film recyclable like uncoated film.
- Manufactured in a clean room class 1000.
- Ordering width (max): 2000 mm.
For more info, please contact; [email protected]
Substrate Availability
|
Substrate
Thickness (micron)
Release Force (cN/25 mm) Extractible Si by FTIR & Rinsing (ng/cm2) * Test carried out by certified, external company Outgassing (ng/cm2) * Test carried out by certified, external company Composition by FTIR (ATR) |
PET
10 - 500
20 None detected * both sides None detected No silicone detected |
PI (KAPTON)
10 - 500
40 n / a n / a n / a |
BOPP
10 - 500
40 n / a n / a n / a |
HDPE
10 - 500
20 n / a n / a n / a |
* PET technical information available.
* FINAT 10 test method used.
* Used a solvent-based acrylic tape.
* All substrates are still under "stability" measurements.
* FINAT 10 test method used.
* Used a solvent-based acrylic tape.
* All substrates are still under "stability" measurements.
